With the handshake method, the IC or switch to the vertical direction of the smooth pull up (non-forced pull up), so that the pull out of the IC can get a complete PIN.
The ICs that are arranged in a dense arrangement can be pulled directly without moving to other ICs.
Contact surface within 5.5cm different size IC can be pulled out in a very short time, simple and effort.
Suitable for dual in-line components for quick separation of components from the board.
Can take up the size of the integrated block: 8 feet to 24 feet.
The material is heat treated to ensure elasticity and deformation.
Stainless steel material covered P.V.C. feel comfortable.
Instructions for use:
1, DIP can be easily removed from the substrate without any damage to the IC conductor. Can be pulled up in the SOCKET or PCB PLCC, PGA, PCLL, DIP packaging IC.
2, with the handshake way, the IC to the vertical direction of the smooth pull up (non-forced pull up), and make the pull out of the IC can get a complete PIN.
3, the intensive arrangement of the IC can be directly pulled out, do not move to other IC.
4, the contact surface within 5.5cm different size IC can be pulled out in a very short time, simple and effort.
Remove the DIP chip, if the word screwdriver, because there are other components around, very handy, if there is no dedicated extraction folder, it is difficult to remove, improper operation, will lead to damage to the socket or chip, and even cause the BIOS chip fold Split, broken feet. We are ready for the chip from the folder, can be used directly on the board, easy to pull DIP package chip, is from the pull CPU, BIOS and a variety of chips, integrated block of good tools for the motherboard, microcontroller, programmer.
Compatible with:for Keyboard Switch Mouse Micro Switch Puller Remover Tool
Color: As pictures show
Size :Length :10.5cm
1 x Switch Puller