100% brand new and high quality.
The AC600 HighPower Wi-Fi AP/Repeater is mainly used for providing free Wi-Fi service in big area such as factory, community, street or etc.
802.11AC is the next generation of WiFi. Compatible with IEEE 802.11ac/a /n/g/b standards. Extend Wi-Fi Coverage area easily, and eliminate Wi-Fi dead zone.
Ultra spped up to 600Mbps at 2.4GHz and 5GHz band concurrently.
Simultaneous 2.4GHz 150Mbps and 5GHz 450Mbps connections.
3 working mode: Wireless AP, Repeater, Router. 2 x 7dBi external Antennas, 1 Antenna for 2.4G and 1 Antenna for 5G.
1 x 100/10Mbps Auto-Negotiation Ethernet WAN port. 1 x Reset button allows users to reset the device to original configuration.
2.4G and 5G transmission power is adjustable.
Up to 1000mW transmission power in Boost mode and the enhanced receiver.
WPA-PSK/WPA2-PSK encryptions provide user networks with active defense against security threats.
Integrated Passive Power over Ethernet (PoE).
Build in lightning arrester (15KV ESD).
Very strong weatherproof design and Housing.
Original design, private Tooling.
Item Type: Wi-Fi AP/Router
Plug Type: US Plug, UK Plug, EU Plug(Optional)
Wi-Fi Supported Frequency: 2.4G and 5G
Encryption mode: WPA-PSK/WPA2-PSK
Quantity: 1 Pc
How it works:
1.Place the straps through the slots on the back of the AP/Router and then around the pole Tighten the straps.
2.Connect one end of an LAN cable to the POE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.
3.Connect the LAN port of the power injectt a PC using another LAN cable.
4.Plug the power adapter into a wall socket.
5.The connection will be similar to the figure below after the above steps are finished.
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 x Wi-Fi AP/Router
2 x Antenna
1 x Power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main body holder
1 x Screw fitting
2 x Cable ties
1 x Quick Installation