OOTDTY100% brand new and high quality
Various functions, not only can be used as a buoyancy bar, but also can be used as a heightened tripod and landing gear.
Effectively increasing 60mm above the dirt, sand, grass, provide good protection for drone camera and gimbal.
Allow the drone to take off or land on water, or use it as extension landing gear to reduce the vibration when landing.
Non-destructive installation design, easy to install, can be disassembled and assembled by itself.
Comes with a 1/4 adapter, it can extend other parts, used with cameras, fill lights, etc.
Light weight design won’t bring drone heavy loading.
It is specially designed for D-ji Mavic Air 2.
Attention: Please note that the floating kit will allow the drone to land or take off on calm water, but not choppy water, otherwise, the drone may lost.
1.Put the main mount top cover on the top of the drone.
2.As the picture shown, fix the 4 sponge stick mounts on the main mount connecting part.
3.Turn the drone over, and then align the main mount holder with the bottom of the drone.
4.Fix the main mount holder and main mount top cover with two M3 screws on the drone.
5.Insert the sponge sticks on the loops of the main mount holder, and the adjust each stick to a proper balance position.
6.After the adjusting, and then put the drone on clam water, and check the balance. If it is not balance, please adjust the position of the sponge sticks, and make the front and back balance.
Item Type: Landing Gear Kit
Compatible models: for D-ji Mavic Air 2
Quantity: 1 Set
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 x Main Mount Connecting Part
1 x Top Cover
2 x Sponge Stick
4 x Sponge Stick Mount
2 x Screw
2 x M3 Screw
1 x Outer Hex Screw
1 x Camera Tripod Adapter
1 x M5 Screw
1 x Washer
1 x Sponge Tape
1 x Manual