OOTDTY100% brand new and high quality
Supports 433MHz RF remote.
Supports status tracking: device status is timely provided to app.
Supports remote turn on or off connected appliance.
Supports enabled single/repeat/countdown timers.
Supports numerous WiFi smart switches one smart phone.
It is a remote control power switch that can connect to a wide range of appliances.
Works with for Alexa. Works with for Nest.
It transmits data to a cloud platform through the WiFi Router, which enables users to remotely control all the connected appliances, via the mobile application.
As long as the mobile has net-work, users can remotely control the appliances by turning them on off from anywhere at any time.
Item Type: Receiver+Remote Control
Size: receiver: 88x39x23mm/3.4×1.5×0.9in, remote control: 54x29x15mm/2.1×1.1×0.5in
Input: AC90-250v 50/60Hz
Max load: 10A
Working frequency: 2.4G WiFi
Remote Frequency: 433MHz
Working mode: jog, self-lock, interlock;WiFi mode
Quantity: 1 Set
Press the learning button of the receiver eight times, then the receiver will clear out all the remote control data storaged in the device. When the LED flashes for several times, it indicates the clearing function has been completed.
(After clearing all the storage codes in the receiver, all remote controls need to receive the device once again to use.)
1.Jog Mode: press the remote control button, then the receiver relay will start; release the button, the receiver relay will close.
2.Self-lock: press the remote control button once, the receiver relay will start; then press it again, it will close.
3.Interlock: press the button A of the remote control, the receiver relay will open; then press B, it will close.
Working mode setting:
1.The setting of jog mode: press the learning button of the receiver once, then the LED will be on to enter the setting status; then press the button and the LED will go out and the setting is successful.
2.The setting of self-lock mode: press the learning button of the receiver twice, then the LED will be on to enter the setting status; then press the button and the LED will go out and the setting is successful.
3.The setting of interlock mode: press the learning button of the receiver three times, then the LED will be on to enter the setting status; press the A button and the LED will flash and be always on, then press the button B, the LED will flash and go out, and the setting will be successful.
(Attention: the receiver can only storage 15 groups of button data(on the remote control). It the number is greater than 15, it will cover the first group data automatically.)
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 x Remote Control
1 x Receiver
1 x User Manual