OOTDTY100% brand new and high quality
Supports 433MHz RF remote.
Supports numerous WiFi smart switches one smart phone.
It is a remote control power switch that can connect to a wide range of appliances.
WiFi control, wireless remote control, manual key control.
It can remote control the devices throught the phone APP, easy and simple to operate. Can both be compatible with for App-le and for An-droid systems.
Support voice control, it is suitable for most apps.
Wireless remote control receiving module, has the learning fixed code and learning code chips, high sensitivity.
It transmits data to a cloud platform through the WiFi Router, which enables users to remotely control all the connected appliances, via the mobile application.
Widely used in smart curtains, smart TV, camera, air conditioner, light and so on.
Item Type: Receiver+Remote Control
Size: receiver: 94x45x27mm/3.7×1.7×1.06in, remote control: 55x29x14mm/2.1×1.1×0.5in
Input: AC90-250v 50/60Hz
Number of controllable channels: 1 channel
Control mode: WiFi/wireless remote control/manual key
Working frequency: 2.4G WiFi
Remote Frequency: 433MHz
Max load: 10A
Remote/Working mode: jog, self-lock, interlock
Quantity: 1 Set
1.Jog Mode: press the remote control button, then the receiver relay will start; release the button, the receiver relay will close.
2.Self-lock: press the remote control button once, the receiver relay will start; then press it again, it will close.
3.Interlock: press the button A of the remote control, the receiver relay will open; then press B, it will close.
Working mode setting:
1.The setting of jog mode: press the learning button of the receiver to start it, then press it twice, the LED will be on to enter the setting status; then press the button and the LED will go out and the setting is successful.
2.The setting of self-lock mode: press the learning button of the receiver to start it, then press it three times, the LED will be on to enter the setting status; then press the button and the LED will go out and the setting is successful.
3.The setting of interlock mode: press the learning button of the receiver to start it, then press it four times, then the LED will be on to enter the setting status; press the A button and the LED will flash and be always on, then press the button B, the LED will flash and go out, and the setting will be successful.
(Attention: the receiver can only storage 15 groups of button data(on the remote control). It the number is greater than 15, it will cover the first group data automatically.)
Press the learning button of the receiver to start it, then press for eight times, then the receiver will clear out all the remote control data storaged in the device. When the LED flashes for several times, it indicates the clearing function has been completed.
(After clearing all the storage codes in the receiver, all remote controls cannot be used with the receiver.)
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 x Remote Control
1 x Receiver